iLMS知識社群歷程檔登入
位置: 劉南明 > 職涯檔案 > 個人檔案
個人檔案
工作經歷
個人著作
計畫
獲獎榮譽
基本資料
姓名: 劉南明
系所: 修平科技大學 / 機械工程系 [數位教學紀錄]
研究領域: 工程圖學、電腦輔助機械製圖、電腦輔助設計與與製造
辦公(研究)室: C0402-2
自我介紹
籍貫:台灣台南縣。
出生地:台南縣歸仁鄉。
嗜好:旅遊、攝影、上網、喝茶聊天。
政治取向:偏灰色。
證照:電腦輔助機械製圖乙級。
個人著作
期刊論文
1. 劉南明, "碳化鎢於粉末混合放電加工過程中加工性能之建模與分析 [修平學報]," , 2018.
2. 劉南明, "使用空氣槍冷卻系統於 Ti-6Al-4V 鈦合金的 研磨精加工性能之分析與最佳化 [修平學報]," , 2016.
3. 劉南明, "Modeling and analyzing the effects of air-cooled turning on the machinability of Ti–6Al–4V titanium alloy using the cold air gun coolant system [Int J Adv Manuf Technol]," , 2013.
4. 劉南明, "Experimental investigation of tool vibration and surface roughness in the precision end-milling process using the singular spectrum analysis [Int J Adv Manuf Technol]," , 2013.
5. 劉南明, "Analysis and modeling of the bending performances of the circular holes in the fold zone during the L-shape bending process [Hsiuping Journal]," , 2010.
6. 劉南明, "Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide [The International Journal of Advanced Manufacturing Technology]," , 2010.
7. 劉南明, "Experimental design and performance analysis of the V-die bending process using the response surface methodology [Hsiuping Journal ]," , 2010.
8. 劉南明, "Application of response surface methodology in describing the thermal performances of a pin-fin heat sink [International Journal of Thermal Sciences]," , 2009.
9. 劉南明, "The method of grey-fuzzy logic for optimizing multi-response problems during the manufacturing process: a case study of the light guide plate printing process [The International Journal of Advanced Manufacturing Tech," , 2009.
10. 劉南明, "Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3 /TiC mixed ceramic tool based on the response surface methodology [Journal of Material Processing Technology]," , 2008.
11. 劉南明, "Modeling and analysis of the effects of processing parameters on the performance characteristics in the high pressure die casting process of Al-Si alloys [ The International Journal of Advanced Manufacturing Technolo," , 2008.
12. 劉南明, "The effect of heterogeneous second phase on the machinability evaluation of spheroidal graphite cast irons in the WEDM process [Materials & Design]," , 2008.
13. 劉南明, "Machining parameters optimization on the die casti [The International Journal of Advanced Manufacturing Technology]," , 0008.
14. 劉南明, "Apply grey forecasting method for fittingand predi [修平學報]," , 0003.
國內會議論文
1. 劉南明, "使用CBN刀具於高速鋼的尾座頂針之車削過程中加工參數最佳化研究 [中國機械工程學會第三十四屆全國學術研討會]," , 2017.
2. 劉南明, "使用頻譜分析儀於精密端銑削過程中切削刀具振動與表面粗糙度之建模與實驗分析 [中國機械工程學會104年度年會暨第32屆全國學術研討會]," , 2015.
3. 劉南明, "The modeling of thermal characteristics using the grey dynamic model GDM(0,2) and rolling modeling: a case study of heat transfer for liquid metals in the turbulent flow [中華民國力學學會第三十八屆全國力學會議]," , 2014.
4. 劉南明, "台灣晶圓代工產業經營績效之評估 [第十二屆(2014)產業管理創新研討會- 精實創新與創意思考]," , 2014.
5. 劉南明, "實驗探討使用冷空氣氣鎗冷卻系統的 冷卻效應於高速銑削過程 [中國機械工程學會第三十屆全國學術研討會論文集]," , 2013.