iLMS知識社群歷程檔登入
位置: 洪振聰 > 職涯檔案 > 個人著作
個人檔案
工作經歷
個人著作
計畫
獲獎榮譽
期刊論文
1. 洪振聰, "The method of grey-fuzzy logic for optimizing multi-response problems during the manufacturing process: a case study of the light guide plate printing process [The International Journal of Advanced Manufacturing Tech," , 2009.
2. 洪振聰, "Investigating the Machinability evaluation in the hard turning of Hadfield steel with Al2O3/TiC mixe [Journal of Material Processing Technology]," , 2008.
3. 洪振聰, "Thermal Optimal Design for Parallel Plain-Fin Heat Sinks by Using Neuro-Genetic Method [IEEE Transactions on Components and Packaging Technologies]," , 2008.
4. 洪振聰, "The method of grey-fuzzy logic for optimizing multi-response problem during the manufacturing process: a case study of the light guide plate printing process [International Journal of Advanced Manufacturing Technolog," , 2008.
5. 洪振聰, "A grey and fuzzy algorithms integrated approach to the optimization of turning Hadfield steel with Al2O3/TiC mixed ceramic tool [Journal of Material Processing Technology]," , 2008.
6. 洪振聰, "The effect of heterogeneous second phase on the machinability evaluation of spheroidal graphite cast irons in the WEDM process [Materials & Design]," , 2008.
國內會議論文
1. 洪振聰, "應用智慧製造技術於鏟花品質檢測之研究 [中國機械工程學會「111年度暨第39屆全國學術研討會」]," , 2022.
2. 洪振聰, "雕模放電加工之專家系統開發研究 [中國機械工程學會第三十八屆全國學術研討會]," , 2021.
3. 洪振聰, "應用類神經網路與基因演算法於木工機吸塵螺帽之最佳化設計 [中國機械工程學會第三十七屆全國學術研討會]," , 2020.
4. 洪振聰, "木工機銑刀吸塵螺帽之最佳化設計 [中國機械工程學會第三十六屆全國學術研討會]," , 2019.
5. 洪振聰, "應用類神經網路與基因演算法於預熱塞之最佳化設計 [中國機械工程學會第三十五屆全國學術研討會]," , 2018.
6. 洪振聰, "預熱塞中鐵-鉻-鋁線(Fe-Cr-Al)與鎳線(Ni)長度與線徑變化對穩態時間與溫度之影響研究 [中國機械工程學會第三十四屆全國學術研討會]," , 2017.
7. 洪振聰, "應用反應曲面法(RSM)於預熱塞之鐵-鉻-鋁線(Fe-Cr-Al)與鎳線(Ni) 長度最佳化設計研究 [中國機械工程學會第三十三屆全國學術研討會]," , 2016.
8. 洪振聰, "運用空氣冷卻系統於車削鈦合金過程中刀具溫度與表面粗糙度之驗證與建模分析 [中國機械工程學會第二十九屆全國學術研討會]," , 2012.
9. 洪振聰, "使用反應曲面法與連續近似最佳法來探討Ti-6Al-4V 鈦合金之線切割放電加工性能與最佳化 [中國機械工程學會第二十九屆全國學術研討會]," , 2012.
10. 洪振聰, "Investigating the effect of circular holes in the fold zone of sheet metal during the L-bending process based on the response surface methodology [中國機械工程學會第二十六屆全國學術研討會]," , 2009.
11. 洪振聰, "Forced Convective Heat Transfer for Partially-Confined Compact PPF Heat Sinks with Top-Bypass Effect [Proceedings of InterPACK’05]," , 2005.
12. 洪振聰, "Fluid Flow Characteristics for Partially-Confined Compact PPF Heat Sinks [2005 ASME Summer Heat Transfer Conference]," , 2005.
13. 洪振聰, "Thermal Optimal Design for Partially-Confined Compact Heat Sinks [Proceedings of InterPACK’05]," , 2005.